CAP-04 · OEM / ODM
Your brand on our BBU platform.
Start from a proven 51.2V LFP platform and change what your market actually asks for — enclosure, connectors, protocol maps, branding and documentation. One program lead carries your RFQ through six gates to mass production, and batch sizes scale from engineering samples to full rack programs.
Program structure
Six gates from RFQ to mass production.
RFQ
You send rack form factor, target market, volumes and bridge-time expectations; we reply with feasibility and a platform recommendation.
Spec definition
Electrical, mechanical and communication requirements are frozen into one spec sheet — the single reference for everything that follows.
Sample
Engineering samples are built on the line that will run production, so what you approve is what you scale.
Validation
Electrical, environmental and transport pre-compliance screens run against the frozen spec, documented per sample batch.
Pilot run
A small batch crosses the full flow — SMT, welding, aging, final test — and the gate closes only when its data review passes.
Mass production
The line is locked to the approved revision; every shipment leaves with batch QC documentation.
Customization scope
Where OEM programs usually land.
White label
Your brand on proven BBU platforms: enclosure marking, packaging and datasheets issued under your name.
Mechanical customization
Form factor, rails, bezels, connector layout and mounting points adapted to your cabinet standard.
BMS customization
CAN / RS485 / SNMP protocol maps, alarm sets and host integration matched to your power system.
Certification support
Samples, documentation and lab liaison for the certification path your market requires, run through accredited third-party labs.
FIG 04 · OEM program review at the project desk
Program management
One program lead, one thread of truth.
Custom hardware fails in the hand-offs, not the machines. Each OEM program runs under a single lead who owns quoting, scheduling and engineering change control from first RFQ to recurring mass production.
- A single contact for commercial and engineering questions alike.
- Change control: any spec revision re-opens validation deliberately, not accidentally.
- Sample-to-production traceability, so approvals carry over intact.
- Batch documentation with every shipment, ready for your audits.
Bring us the RFQ.
A one-page brief is enough to start — form factor, market and volumes. We come back with a platform recommendation and the gate plan attached to it.
